I’m needing to adjust my 94J D5 flywheel clutch, have the 2 retaining tabs loosened but unable to force the band to move via the small rectangular access. Can I use a bar to turn the driveline to make this adjustment? Better yet, I would really appreciate any serious advice how to make the adjustment. The service manual refers to “tabs” that are to be pushed. I’m not sure what exactly are these tabs and I am fearful of using too much force, possibly on the wrong object, and injuring the clutch. That’s why I’m asking if I can carefully turn the driveline to move the clutch ring clockwise. My longtime mechanic is now in a nursing home and no longer of sound mind. Thanks so much for your help and advice!