DavidMBaldwin
New User
A few years ago I purchased a YM1610D tractor to use around my property. It always seemed to be low on power but always turned right up and ran well. Then last year I was using a 4-ft bush hog and the engine started lossing power. Then I noticed fuel droplets blowing out of the exhaust stack. I decided to replace all of the injectors to hopefully restore some of the power. Even though I have bleed the fuel lines several times, the tractor does not try to start. I got frustrated and left the tractor to set over the winter. Now I have restored my interest to get the tractor running again. But I need some experienced help with your recommendations on how exactly to bleed the injections.