There I fixed it

[craigco]

How bout using jb weld inside of the oil cup for the super H air cleaner, bottom has pin holes that leak oil.
Let's hear your thoughts....
GG Wes

I used permatex 2 part radiator epoxy on one of my oil cups a month ago. Seems fine so far. Used the same on a pinhole on a radiator tank. Holding fine .

 

[NoDakInMN]

How bout using jb weld inside of the oil cup for the super H air cleaner, bottom has pin holes that leak oil.
Let's hear your thoughts....
GG Wes

Used it on the oil bath cup on an A John Deere over 20 years ago, to this day, no drips, no runs, no errors.

 

[NoDakInMN]

A lot of JB Weld failures can be attributed to improper application. People will be doubtful if it will work then fail to properly prep the surfaces to be sealed, fail to give it time to properly cure and then blame it because it doesn't work.

 

[GermantownGreen]

Thanks for sharing your ideas.
At sectional track today in Mt Grove Mo
Daughter, Kelsey, part of the 4/800 girls relay, moved onto State today!
GG Wes