Hello. Any Versatile owners out there. I recently purchased an 850 series 2. It had been sitting outside unused for at least 6 years. It is running fine but I have a couple issues. Hydraulics seem to be deadheading. To prevent overheating I use a loop hose on one of the hydraulic outlets. Also there is engine oil getting into the hydraulic system. Loses about 10 litres of engine oil every 3 hours. There is a second hydraulic pump installed on this unit driving off the back of the oil pump. I put a new hydraulic pump on but the issue remains. The tractors seems to have high oil pressure. Runs at a steady 60+ psi all warmed up and working hard. Not sure if this could be an issue. Any help or hints would be appreciated. Thanks