Work is progressing on our club's '39 UTS (Thanks to everyone here for all the info so far). I've started a new thread as this relates strictly to the water-pump. This tractor has lead a hard life and the water-pump proves that. We need new seals and bushings; the bushing I think I can source, but I haven't found a comparable seal. I've attached some photos for confirmation. The bushing appears to be .750 x .875 x 1.500" and the seal .745 x 1.250 x .355, however things are worn to the point where those readings are +/- .0010.
"MM_1.JPG" shows the seal housing in place; in "MM_2.JPG" I have shown the bushing and seal well proud of their positions for the sake of illustration. If anyone has part numbers/sources for either or both, as well as any other consumables in the pump, it would be greatly appreciated.
"MM_1.JPG" shows the seal housing in place; in "MM_2.JPG" I have shown the bushing and seal well proud of their positions for the sake of illustration. If anyone has part numbers/sources for either or both, as well as any other consumables in the pump, it would be greatly appreciated.