(800) 853-2651
SHOP NOW

Search results

  1. K

    Update on Thistle spraying

    A few days ago I posted that I was going to spray some thistles. I went over and checked them and most were brown with a few yellow so I guess I got them some. Now in July after they (if any, and I figure there will be some) grow back after the first cutting of hay in that field, I'll spray...
  2. K

    Vibrating vest

    I guess today I will be fitted for a vibrating vest to help my lungs clear. I'm told they work really well to get the crap broken up and out of there. With any luck it just might help me breathe better so I can continue to make hay this year again. According to my latest CT scan I have...
  3. K

    2 4 D mixing

    This may sound completely stupid, but up to and including last year a good friend of mine that had his applicators license would do any spraying I needed done. I know I don't need a license and I've read the folder on the jug, but for the life of me I cannot find how much 2 4 D to mix with60...
  4. K

    Do you ever get over Lyme disease

    I've been bothered by it since May. It was miss diagnosed until September, then it was 3 weeks of antibiotics. I can now push the clutch and get off and on my Massey 255 but my feet feel now like they are on fire and feel like they have an Ace bandage wrapped too tight on them all the time. I...
  5. K

    Case 730 starter

    The 730 I bought a few weeks ago is in need of new brushes for the starter, or another starter. I've trie several places and can't seem to find any new brushes and bushings. I can find new starters for it at 500 dollars but nobody seems to have brushes. They look like a common brush, maybe a...
  6. K

    730 diesel horsepower raring

    I bought a Case 730 diesel yesterday at an estate auction and just wondering what the horsepower rating is on this tractor. It seems to run out good but I don't need it so I'm going to sell it. What is a fair asking price, the sheet metal is all good but the rears will need replaced in the...
  7. K

    Too late to mow hay

    I'm really late getting my first cutting done due to problem with sciatic nerve problem and rain this year. I looked at the fields I still need to do and there is an awful lot of brown (over ripe) hay in those fields but there is a lot of new green hay coming up in it. Question is, should I...
  8. K

    John Deere 820 MoCo

    I bought a J.D. 820 haybine (MOCO) and it has a section missing. The sections are bolted on. I' thinking I can remove a guard and replace the section. I know I've done it on a New Holland but I'm totally new to the John Deere. Looking for a little advise here, can I do it on the machine or...
  9. K

    1966 Inte4rnational truck for sale

    There is a 1966 International pickup on the Athens Ohio facebook marketplace for sale. It says it's a V-8 and 4 wheel drive. but it will need brakes. Seat don't look too good and it looks like it has a wood flatbed on it. Says they want 2200 for it. I have no part of it nor have I ever seen...
  10. K

    John Deere 820 MoCo

    I just bought a J.D. 820 mower Conditioner and the hose that raises and lowers the machine is gone. Wondering if anybody can tell me if it runs from the hydraulic cylinders on the back to the tractor. (I'm pretty sure it does, I know it is missing from the top of the left cylinder and figure...
  11. K

    Case 350 diesel crawler starter needed

    I'm in need of a starter for a Case 350 diesel crawler. We got this dozer the other day and I was feeling under the weather so we hooked onto it and loaded it without looking at it at all. Since then I've been in the hospital and just got around to looking at it this afternoon. I thought...
  12. K

    I have Case 580B extendahoe that we're gonna part out

    I just got a Case 580 B with a 180 diesel and an extendable boom on the hoe that we're going to part out. There are several good cylinders on both the loader and the hoe that I won't be needing. I will keep the swing cylinders and one outrigger cylinder. The extendable boom I will remove at...
  13. K

    round baler twine comes unrolled when kicking bale out o

    Just wondering if anyone has figured out a way to keep the loose end of the twine from coming off the bale when it is kicked out of the baler that has a bale kicker (or ramps) on it. It happens quite often on mine and I sure haven't figured a way to stop it. It does it when the bale rolls off...
  14. K

    N.H. 404 hay crimper

    Wondering if they ever made a New Holland 404 hay crusher (crimper) with both steel rollers or were all made with 1 steel and 1 rubber.
  15. K

    Update on friend in the hospital

    My Old friend that's been in the hospital for the past 6 weeks or so is finally out of his pain. He passed away a little while ago. This might sound bad, but I'm thankful he is not hurting any more, he's at rest now. The sad part is that today is his wife's birthday. He will be missed by...
  16. K

    Update on friend in the hospital

    I talked to Bobby's wife this evening and they have moved him back into ICU. He has another bleed and I think it's in the brain but I'm not sure. He's having seizures now so I guess only time will tell when he's had enough suffering and gets moved on to a place with no pain. Keith
  17. K

    Prayers for fellow YTer.

    An old friend of mine is in Ohio State University hospital. He went in before Christmas with a brain bleed. The brain bleed was partially fixed (still has some seepage for some reason). He also had bleeding in an intestine which they got repaired and now has infection in his blood. He can...
  18. K

    Massey 150 to 175 transmission fit up

    I posted down on the Massey forum and thought I'd post here too. Will a front (engine back to the bell house), match up and work on a Massey 175 bell house and tranny? The 150 is a gasser and the 175 is a diesel
  19. K

    150-174 tranny swap???

    Wondering if a transmission and rearend (from engine back) from a Massey 150 will bolt up and work on a Massey 175. The 150 is a gasser and the 175 is a diesel. Thanks in advance Keith
  20. K

    Rotary cutter blade straightening

    My 6'rotary cutter, I have no idea what brand, has 27 1/ long by 4 wide blades on it. I can't seem to locate any that are 4wide and they are about 1/2 thick (don't remember the thickness for sure) has one blade bent down to the point where it hits the ground. Question is can I put it in my...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top