(800) 853-2651
SHOP NOW

Search results

  1. oakdaleotter

    Sleeve Protrusion 310 idi diesel

    Thanks everyone for all the comments. Have good luck on all holes except one. Measures one thousand on one side and 5 on the other side. It appears that it is a carbon buildup. Can't seem to remove it with wire wheel there I use a scraper.
  2. oakdaleotter

    Sleeve Protrusion 310 idi diesel

    Could I get some pictures of what people have made, bought or repurposed as a bridge to hold their dial indicator? In Tom Uptons picture above he used a flare tool vise. Good idea. Mine isn't quite long enough to work well. I'm thinking about finding a piece of square stock like 1" and making...
  3. oakdaleotter

    Sleeve Protrusion 310 idi diesel

    Thanks so much for the detailed response. These details are what I need to move forward. I have acquired a dial indicator.
  4. oakdaleotter

    Spin on oil filter adapter for 1650 or 1800

    Thanks I will. Heard the name on YouTube. I'll look into it.
  5. oakdaleotter

    Spin on oil filter adapter for 1650 or 1800

    Where can I get an adapter to replace the current sock filter setup? Is this a good idea?
  6. oakdaleotter

    Oliver 770 Diesel - Slow to Start

    I looked at there website. They carry some interesting items. Only an hour from me. Thanks again.
  7. oakdaleotter

    Sleeve Protrusion 310 idi diesel

    Thanks for the picture and response. I am using a dial caliper. What should I use to clean/polish the o-rings landings? So far I wire wheeled the area. Looking better there than I feared. Any tips on removing carbon from the top groove? Is wire wheel ok?
  8. oakdaleotter

    Sleeve Protrusion 310 idi diesel

    I have shims. So, more crush is better, just don't go more than four anywhere. One hole started off 10 over but was sitting on carbon. What can I use to clean out the carbon buildup? Is a wire wheel ok?
  9. oakdaleotter

    Oliver 770 Diesel - Slow to Start

    Thanks. You gave me another source for Oliver parts. And for me, close to home.
  10. oakdaleotter

    Sleeve Protrusion 310 idi diesel

    I'm ready to start fitting sleeves into the block. Book says 1 to 4 thousand. Mine are measuring at about 1. Is there any advantage to shimming closer to 4? What is important when installing new sleeves? 1800c. Lanova injection.
  11. oakdaleotter

    Oliver 770 Diesel - Slow to Start

    Where do you get a gear reduction starter from?I bought one for my 7.3 F350. Like night and day. I concur about using the intake preheat.
  12. oakdaleotter

    Engine identity 1800c

    Thank you for the tip on balancing the crankshaft. I will ask my shop not sure they do that. Yes the picture of the windowed block is the donor that I took my head from. Just baffled about the date stamp it almost appears it is 1974. But thinking that can't be right just don't understand the...
  13. oakdaleotter

    Engine identity 1800c

    Thanks for the picture. Updates of One piece wristband bushing and rod bolts. Anything else. Can you interpret the casting date of my block. That is really what's throwing me off. Tractor is built 1964
  14. oakdaleotter

    Engine identity 1800c

    Yes diesel with lenova injection. I don't have the head number. It's at the machine shop.
  15. oakdaleotter

    Engine identity 1800c

    Thinking my motor is newer than the tractor. Appreciate some info. Before I order an overhaul kit. Tractor 1800c 38-2204 144344-844 Engine 166425A 221620 8674
  16. oakdaleotter

    Oliver 770 Diesel Fuel Issues - Need Assistance

    Thanks for the info. What about the check ball being plugged.small bits of black rubber
  17. oakdaleotter

    Oliver 770 Diesel Fuel Issues - Need Assistance

    There is a checkball in the line that feeds back to the tank mine is screwed right into the top of the fuel injector pump. If you find little pieces in there as mine did it was completely blocked and would idle but not provide any power. I took the ball out and finished and then had the pump...
  18. oakdaleotter

    1800 throw out bearing cross shaft replacement

    Can a new replacement be bought? From where? Or should I have it remade?
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top