(800) 853-2651
SHOP NOW

Search results

  1. crsutton81

    5140 hitch controls

    On a 5140 3pt hitch controls, I had to replace the main lift toggle switch ( part 37). To gain access, the console top had to be awkwardly removed to get it swapped. In the process, the rotary knob ( part 39) that controls the draft control and lever / switch command lifted enough to become out...
  2. crsutton81

    McCormick Model M grain drill

    On a Mccormick model M drill, does anyone know of a source to obtain the helper spring as my son's is missing from his drill. The brackets for each end of the spring is already on the drill. He needs the spring itself along with the rod that passes through it to connect up to the control arm on...
  3. crsutton81

    Farmall 140...what's it worth ?

    There's a later model Farmall 140 that for some reason has caught my interest as a future tractor project. It is complete except the cultivators, but will need work. It does have a complete fast hitch, 12v system, and turf tires all around that are in marginal condition. Sheet metal is present...
  4. crsutton81

    Ashley W.....Farmall 100 / 140 front leveling rod

    We finally had a chance to get the front leveling rod bent so it would accommodate leaving the IH style fertilizer attachment on the 100 through 140 tractors, and use the rod leveling function also about the fast hitch. Posted below hopefully will be the pictures and measurements to fab up one...
  5. crsutton81

    JD 3020 engine panels

    We're looking for a set of original rear engine side panels for a 3020 diesel row crop, part numbers AR 26850 & AR 26851 respectively. Where would be a source for a good original pair of them that would have both of the decals legible on them ? I'm trying not to order a new set as I would like...
  6. crsutton81

    Got 'er done

    The weather has been perfect this week and allowed us to get in the field and get some work done. We finished up today getting the tobacco land gassed and bedded up. Everything went very well doing so in the process, but as usual I'm glad to get this task behind me. Maybe now we can move onto...
  7. crsutton81

    JD 3020 row crop steering

    We're getting the front-end set for 30" rows and have a set of new tie rods on order. While moving the front, I noticed the steering arms are clocked different from each other. Which side is correct ? As it currently stands now, it turns considerably sharper one direction than the other.
  8. crsutton81

    JD 3020 wheel spacing & fenders

    We have a row crop 3020 diesel PS that I'm needing to narrow up the wheel spacing from 36" rows to 30" rows. This tractor has the factory ROPS with a top. The fenders are currently bolted to an adapter bracket that is U bolted to the axle. Will the fenders need to be removed from this adapter...
  9. crsutton81

    Farmall 300 brakes

    We have a 300 that is in need of a brake job, especially on the right hand wheel. I have the brake disks, springs, and parts manual on hand for it. Being that I have never even opened up the brake drum assembly on any of these tractors, is there any words of wisdom ?
  10. crsutton81

    Farmall Cub 101 fertilizer attachment

    A good friend and fellow YT'er brought my youngest son one of the missing pieces of the fertilizer attachment for his Cub, the hopper base and assembly. We got it installed. The problem is with a sprocket larger than a 7 tooth on the hopper base shaft, the sprocket will contact the wing nut and...
  11. crsutton81

    Farmall Cub fertilizer attachment

    We're trying to get the fertlizer attachment mounted onto my son's Cub with a fast hitch. I found the countershaft / clutch unit at a tractor show, but it is missing the brace and chain tightner that goes to the rear wheel. At this point I have not had any luck finding one, therefore I borrowed...
  12. crsutton81

    Farmall shop day

    Being there is pretty cold weather for today and tomorrow accompanied with wind that makes it feel even colder, we pulled my son's Super A into the shop to have a project to work on near some heat. The hydraulic pump was leaking fluid badly into the crankcase. A new hydraulic pump was an item on...
  13. crsutton81

    IH / Farmall sign

    Me and the family recently went out of town for a vacation. While out and about, we stopped at a large antique shop. After some extensive looking around, I found this Farmall sign. It has me wondering if it had belonged to a dealer at one time. I remember my local IH dealer having some similar...
  14. crsutton81

    JD 3020 diesel powershift

    There is a '67 year model 3020 diesel powershift that has come up for sale. I'm planning to go check it out. Is there anything in particular to check over very carefully on with this series ? I have ran a good friend's late model 4020 diesel PS a bit before doing field work, but I have never...
  15. crsutton81

    JD 55 ABH plow

    When transporting this plow down the road, it tends to have the tail wheel violently shimmy to the point that the plow will unhook itself from the tractor if there is much speed involved. Has anyone experienced this or come up with a solution to curb the problem ? There is a plow day held...
  16. crsutton81

    Saturday tractor show pictures

    Today the local tractor club held their antique tractor show and plow day in Lagrange NC. The weather today was perfect for a show with clear skies and the temperature in the low 80's. There was a good turnout of people I thought. This year was the first time that we were able to attend, and...
  17. crsutton81

    Farmall Cub pto

    Youngest son's Farmall Cub has started to have the pto shaft walk out of the rear of the tractor just enough to make it chatter and slip. Otherwise it has acted fine until now. Looking at my parts manual, it shows to have a snap ring ( part 49 ) against the inner bearing to hold it in place if...
  18. crsutton81

    Got the Cub going

    <img src=https://www.yesterdaystractors.com/cvphotos/cvphoto163758.jpg> Youngest son Cameron recently bought himself a Farmall Cub. It was mostly in good mechanical condition when he got it, but it needed a little TLC to make it a nice operable unit. After changing to 12v system since the 6v...
  19. crsutton81

    Farmall SA hydraulic pump

    On a '51 Super A that my son has, we're going to need to pull the hydraulic pump off to either try and re-seal it around the shaft, or simply replace it. Being that I have never had a need to remove one before does the drive gear withdraw from the engine gear train, or do we need to do...
  20. crsutton81

    It followed us home

    <img src=https://www.yesterdaystractors.com/cvphotos/cvphoto161731.jpg> Oldest son had the opportunity to get this JI Case disk. I had one several years ago, and like a dummy I sold it when I sold the JD 620. It always cut very well. Jon F if you see this post what model are these disks and...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top