Search results

  1. W

    JD 1020 W/ 37 Loader

    Any recommendations on a hydraulic pressure tester. Mine has fell apart from old age.
  2. W

    JD 1020 W/ 37 Loader

    I’m going to check that first, but the up and down valve has a lot of slop to it and it doesn’t seem smooth like my tilt on my bucket which has plenty of power.
  3. W

    JD 1020 W/ 37 Loader

    My loader on my 1020 seems a pretty week (I know these loaders aren’t real strong.). I was thinking about changing the 2 spool valve out and putting a new one on. Any suggestions or help would be great!
  4. W

    John Deere 37 Loader Bucket

    I have a John Deere 1020 with a JD 37 loader. I have the old school small bucket but I would like to get a 5ft bucket for it. Does anyone know where I could find one?
  5. W

    JD 1020 w/ 37 Loader

    I have had this tractor for almost a year now and it has always been fast. The older gentlemen who had it before me said it was fast as well. I gained a little power by repacking the cylinders, but not much and it did not correct the speed. It has a two spool valve on the right side. I have...
  6. W

    JD 1020 w/ 37 Loader

    I have a John Deere 1020 with a 37 loader on it. I recently rebuilt the cylinders on the loader, as the loader would not pick up much and moved very fast. Unfortunately fixing the seals on the cylinders did not fix this. When moving the loader up and down the loader goes really fast and bounces...
  7. W

    6000 Series SOS

    Scott I will try that and see what happens. I?m not wanting to restore it. I have plenty of farmalls for that I just need it to clean up a place I recently bought. Like run a 3 point 5ft disc, drag, and move gravel.
  8. W

    6000 Series SOS

    Bern from what I understand it is 3 and 5 that don't engage / slip out. He stats that it seems like it goes into neutral, but when you idle up and goes back in. I am going to try an go out and drive it with my father-in-law and see what exactly is going on. Here is a video of the tractor...
  9. W

    6000 Series SOS

    Hey Guys & Gals (If there is any out there) I recently found a Ford 6000 Series Diesel tractor up for sale here locally, and I am interested in buying it. Unfortunately, there is a few issues with it, but I wanted to seek some opinions on it first. The tractor starts and runs good, pto engages...
  10. W

    Farmall H Starter Issues

    David, No. This H has a key instead of a push button. I mean do you think the switch is getting caught? Wouldn’t you hear the starter grinding though?
  11. W

    Farmall H Starter Issues

    David, That’s what I’m trying to figure out. Why are these melting...
  12. W

    Farmall H Starter Issues

    I’m just going to tear the starters down and tack them back with silver since it has a higher heat tolerance and go from there.
  13. W

    Farmall H Starter Issues

    Yes the tractor runs but I have gone through two starters in a matter of two weeks!
  14. W

    Farmall H Starter Issues

    David, I can get the tractor started. I can somewhat turn the pulleys by hand. Unfortunately, I do not have a hand crank for any of my IH tractors. My father asked the same thing he said maybe the tractor is tight from sighting. I just don’t see how that would make sense though since the...
  15. W

    Farmall H Starter Issues

    I have that part covered. The stud has never moved while putting the cables on.
  16. W

    Farmall H Starter Issues

    The windings on starter keep burning in two where they connect to the power stud (Battery Cable Stud). See the attached picture.
  17. W

    Farmall H Starter Issues

    Rusty, I agree the Cub, A, B, Super C, M that we own were all converted to 12v way before I was ever around. All these tractors without no issues. Unfortunately, this H is not the same it seems like.
  18. W

    Farmall H Starter Issues

    Kevin, The stud never turned when I put the cable on the starter because I made sure it never moved when I tightened it down. Also the first starter was never touched, which is the one I took apart. Yes the tractor has a solenoid up under the gas tank looks like one off of an old ford pickup...
  19. W

    Farmall H Starter Issues

    Bob, The last portion of your comment is the issue. I pulled the original starter apart and where the power stud comes into the housing where those copper leads are soldered on are broken/ melted. I’m guessing this is the issue with the starter currently in the tractor as well. The question...
  20. W

    Farmall H Starter Issues

    Rustred I will pull it off and try it here later or I will try the first one I took off. But I agree with you about having multiple starters doing the same thing. Unfortunately, I have two doing the same thing.

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top