(800) 853-2651
SHOP NOW

Search results

  1. K

    Common sign around here

    These signs used to be as common as dirt around here.Years ago I used them to patch floors in my cars.I kept this one from a shed I tore down for somebody in the late 70's.It's probably been in this shed in my yard for 25 or 30 years.
  2. K

    Signs I picked out of the dump

    AAA sign I got out of the dump many years ago.We were poking around the iron pile,and I watched my friend walk on this a half dozen times before I finally said,if you ain't gonna pick that up get out of the way and let me have it.It had the remains of a picture of an ear of corn and a...
  3. K

    What is this gizmo?

    I inherited my Ford tractor mechanic friends toolbox,and this was in it.Some kind of a composite ring,with a wooden dowel sticking out.Three stainless points,two with brass straps/conductors on the outside,and one by itself.A lot of people have made guesses about it,I really have no idea.
  4. K

    Some iron in the scrapyard

    A friend with a salvage yard called me to look at some junk they hauled in from an estate cleanup.I guess my job is going to be to figure out some prices on it all to peddle it off.Some interesting stuff,the Fordson on tracks was inside,with the radiator taken off.We figure on selling the junk...
  5. K

    Brand of Fordson attachment

    Can someone ID this Fordson track attachment? It has been suggested that it is a Rigid,but he wasn't sure.
  6. K

    M129 Kohler

    I just aquired another Wheel Horse tractor,a 312.Modern to me.I was looking at the engine tag and it says,M129.I was recording all the numbers in my Wheelhorse book for when I call around for parts.I was trying to tell somebody it is a M129,and he said there is no such thing,it has to be an...
  7. K

    Wheelhorse mower deck question

    I use Wheelhorse tractors to mow with,and have one that was new here in 1973.I use the rear discharge decks,but I hear a lot of people that seem to just hate them.I really don't know why,when I press them on it,they just kind of shake their heads and mumble something.Some like the side discharge...
  8. K

    What is this tool?

    I would like to find out what this tool is.It is about 8 inches in diameter,and is marked in graduations around it on one side.I haven't sanded it off to see if it is in inches.It has a needle that pivots around independently of the wheel.The edge of the wheel,on the side marked with graduations...
  9. K

    Couple of odd tools

    I have dozens of boxes of old obsolete and specialty tools,and I picked out a couple of odd tools while looking for something today.the funny U-shaped clamp I have no idea about.The lever action tool was thought to be a setting tool,but I really have no idea.The long bar is a babbit...
  10. K

    Nuday tool

    I have a couple of the Nuday rockshaft tools,they are HG 101's.I'm selling off a disabled friends stuff,he was a Ford mechanic all his life.I need to find a fair price,not giveaway,and not the high wait-around for a collector price.Most all of his tools I have figured out prices on and sold...
  11. K

    Ford rockshaft tool

    I have a couple of the cast aluminum jigs used to set up the rockshafts on the N series Fords.I don't have a picture right now,but it is a a couple of feet tall,and pie shaped.If you know what it is you will know what it looks like.I have somebody doing Ford tractors and he would like to buy...
  12. K

    Name for this

    I think there's a word for performing this act,but I can't think what it would be.
  13. K

    What is this tool?

    When I sold my bucket truck I found this tool under this seat.It must have been in there when I bought it about 20 years ago.One half threads into the other half,and is split to slide over a cable or rod.One half has two set screws to hold whatever you slide it over.I served a small amount of...
  14. K

    ID of a Ford engine

    I have a Ford gas industrial engine,I would like to know just what it is before trying to find a PTO clutch setup for it.I did get the numbers on the right side,the cast in ones.They are,CONN 6015J.There are no stampings in the pan rail like I have on an old backhoe,but this was never a tractor...
  15. K

    Update of carpenter tool ID

    The owner of the old tool found somebody that knew what it was,and showed him how to use it.It is a log scale.That was my first thought,but because i've never seen one like that,and because the numbers made no sense to me I kind of dismissed that idea.He even came up with a set of directions...
  16. K

    Old carpenters tool??

    A friend just found some type old tool in the wall of a barn he is working on.It looks to be some kind of layout device.It is about 20 inches long,with a fitted brass plate on one end,and a brass foot on the other.The foot is bigger than the actual stick,like it is meant to be used as a fixed...
  17. K

    Snorkel lift

    I have an 06 TB 50 Snorkel list.The swing is either dead stop or full bore,top speed.I noticed the lift,on the same lever,is modulated,move it a little for slow,and move it more for faster.Same thing for the wheel drive.I just got to thinking that maybe it should be the same for the swing.I am...
  18. K

    ID of lathe

    A friend has this lathe that was being junked at a job he was on.His wife thought it was neat so she had it blasted and powdercoated.He felt that if it was going to take up room in his garage it might as make itself useful,so he made up a bar top for it.There are no tags,and they are just...
  19. K

    ID of old tool

    I have a small old screwdriver/pick/extractor tool kit.It is nickel plated brass,and each of the bits slides into a slot of the case,making it into a T handle tool.There is also a small pair of tweezers in there,but they are wide and flat not pointed.One bit has an extractor end,and is fluted...
  20. K

    Brush Bandit chipper ID

    I am trying to determine what model Brush Bandit chipper I have.The original ID tag is just a faded piece of almost aluminum foil.It does have the date stamped in,October 1988.i was told it is either a model 90 or 100,and would like to find somebody familiar enough with them to tell me what to...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top