(800) 853-2651
SHOP NOW

Search results

  1. F

    Deere 720 tapper lock sleeve and nut

    Hello, I am looking for a sleeve and nut for a 720 Diesel. We can machine the flywheel here. Allen Machine Works is still in business? Thank you!
  2. F

    913hp max Deere 9rx830

    Did you notice this big tractor? Power is 8 times that of a 4020, or twice as the 9410, 25 years ago. It seems that everywhere in the world there are fools buying them. No tools can really use all of that power. Deere said to use the 45ft high speed disk to gain speed vs the 9640rx....
  3. F

    Cold starting MF 860 then no move

    Hello, I had to move the 860 to do some work in the shed, (I needed space), weather was clear and freezing (around 30F), so she sat outside for 2 days under the sun and the stars. When I wanted to put the combine back in the shed, I had to fight dead batteries. I pushed on the "start" button...
  4. F

    Hand clutch pros and cons

    I didnot grew up with those tractors, and I discovered them later. I find that it is very difficult to back up precisely an hand clutch tractor. On the road, it is near impossible and dangerous to do a double clutch to change gear on the go, because you also lack a foot throttle, and you have to...
  5. F

    John deere 7520 complete decal set

    Where is a good place to find a complete set? Thank you!
  6. F

    Double Deere 95

    Hi there! I remember an article on the internet or a picture on another forum about a combine made with 2 John Deere 95 welded together, and powered with something like a Detroit, or a BBC. I think it was close to Dodge city, and this was "back in the days", and the combine was painted yellow...
  7. F

    Using "water wetter" additive in farm equipmen

    I am just reading about this additive, supposely great. Does it mix well with coolgard? Does it works on combines, tractors, etc, with ready mixed antifreeze? Thank you!
  8. F

    Deere 4020 PS all reverse and 5th, 8th gear noise

    I have a new to me 1969 4020 PS. Got it non running. Now I have the engine running. The transmission makes an awful sound in all reverse and in 5th, 8th forward. Like if some bearing were out. Otherwise works very good. Any ideas? Thank you!
  9. F

    Deere 4240 injection pump advance

    I am working on a 4240 for a friend. It is used primarly to pull a dum trailer inside a fertilyzer plant that he has the outdoor maintenance contract. Tractor runs avout 500 hours per year and has been turboed. The tractor was smoking a lot (blue smoke) I had to advance timing suite a bit to...
  10. F

    Fun 2510-2520 repower

    I am thinking about repowering a 2510 or 3020 with a 3 cylinders turbo, just for the fun of it. I am crazy? Someone did that before ? I like the sound of them 3 cylinders better than the ugly 3020 sound.
  11. F

    Deere 5020 repowers around the globe

    DEERE 5020 has been repowered with many engines around the world, in usa to increase hp, in SA, to improve fuel economy and durability. Very tough tractor! Please add to the list if I have forgotten some setups! Cummins 6 855 made by Kinze Cummins 903 (meade) Kinze GM 8-71...
  12. F

    Deere 4240 with longer hood

    Someone proposed me this 4240S (Turboed 4240 assembled in Manheim, with ZF front axle, same gearboxes than 4050 MFWD). It has a lenghtened hood with a much longer fuel tank. It has been very well done. The fuel tank size was a real problem on the 4240S, as they were often running 4440 factory...
  13. F

    Mecum auction results 2022

    Have you seen those results? 420k for little oak 150k for a gas 3020 hfwd! 100k for a 4020! 90k for a well restored Minneapolis 17-30B : On tractorhouse auctions, average price for a running one id 10K. All of this shows that a pristine restoration on a somewhat rare model pays...
  14. F

    Did not read Operator manual, oops....

    I made a mistake.... A friend was using a 4240 on a small dump trailer, with a single acting cyinder to dump it He had it plugged on the left port of the RH side. The aluminum arm commanding the remote under the cab broke. He asked me if he could put the rh remote on the left because the...
  15. F

    Deere 7710 pneumatic seat in SG2?

    Hi all, I would like to know if I can fit a Deere 7710 seat inside a Deere 4050? Thanks!
  16. F

    Minneapolis Moline vertical mulcher

    I would like to know more about this machine. With the current challenges of carbon sequestration into the soil, it looks like an interesting concept!
  17. F

    Deere wheat concave (small wires)

    Last year I tested the Deere 8820 against the MF 860. I think the 8820 does not tresh as nice, main cause being the concave, that is an "universal" one on mine. Wires are 15/16'' inch spaced, 1/4 inch. THe MF860 I have has a small wire concave, and treshes a lot better. For this year, I...
  18. F

    Moving combines

    I finally had to remove all the stuffs out of my parents place and send them to mine in middle of France. Ibought the 860 in 2000 when I was 20, and the super 92 in 2016, while living in Usa. I flipped the 860 front wheels to narrow it down. The super 92 loading was interesting, because the...
  19. F

    Correct way to split 4wd Deere at clutch housing

    Hi there, what is the best way to split an old Deere 4WD like an 8430 for clutch repair? How many hours doew it takes? Pictures? Thank you! My friend said he disassambles both dide sheets,whixh takes huge time. I have seen tractors do with everything bolted on?
  20. F

    Deere chopper converted for brush and trees maintenance

    Few pictures of something you may find interesting: A neighbourgh and friend is doing lots of road maintenance, such as cutting trees branches up to 9m high, or maintaining sharp ditches. Many years ago, he modified an old Deere 5460 to get a tree branch cutter. Nothing was available at...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top