(800) 853-2651
SHOP NOW

Recent content by Keith Molden

  1. K

    Update on Thistle spraying

    I used 2 4 D
  2. K

    Update on Thistle spraying

    A few days ago I posted that I was going to spray some thistles. I went over and checked them and most were brown with a few yellow so I guess I got them some. Now in July after they (if any, and I figure there will be some) grow back after the first cutting of hay in that field, I'll spray...
  3. K

    Vibrating vest

    Thanks a bunch guys for the encouraging words. I had my 2 first 1/2 hour sessions yesterday. The therapist that fitted me said that it will take a few days to see any improvement with the vest so here's hoping
  4. K

    Vibrating vest

    I guess today I will be fitted for a vibrating vest to help my lungs clear. I'm told they work really well to get the crap broken up and out of there. With any luck it just might help me breathe better so I can continue to make hay this year again. According to my latest CT scan I have...
  5. K

    2 4 D mixing

    I ended up just putting 15 gaL on the thistle area and went outside the area as well just in case. I made 2 passes so I should have wetted it down pretty good. Now wait and see if it kills it or makes it grow LOL. I don't have any clover in that field just orchard grass. so I should be good...
  6. K

    2 4 D mixing

    Thanks so much, that's what I was wanting to know. I'll mix it tomorrow and hopefully get rid of some thistles. This will probably be my last year farming at all unless I can get to feeling better. Thinking seriously about having an auction and selling everything, but then I wonder what I...
  7. K

    2 4 D mixing

    I probably will not use it all on that field but I need to probably use that much as there are some other fields I need to spot spray some in . The mixture is what I'm really needing. I don't want to put too little mixture on nor do I want to overkill a whole bunch. It's about 3 miles over...
  8. K

    2 4 D mixing

    This may sound completely stupid, but up to and including last year a good friend of mine that had his applicators license would do any spraying I needed done. I know I don't need a license and I've read the folder on the jug, but for the life of me I cannot find how much 2 4 D to mix with60...
  9. K

    Welding rods left out in the rain

    Years ago when I was learning to weld we used bare rod, no flux at all. It sure taught me how to keep the right arc length. I probably couldn't do that today, it was about 60 years ago and now I'm 76 and have a hard time even seeing the weld area.
  10. K

    Welding rods left out in the rain

  11. K

    I managed to make it to 3/4 century mark

    Happy Birthday, I passed it last year. Glad we're both still above the grass
  12. K

    Something doesnt look right

    There is a what they call a John Deere orchard disc listed on marketplace in Virginia that has pictures and it looks like yours with the rear gangs connecte4d to the front ones like the folks are telling you. You might want to check market place out and see them,
  13. K

    My local feed mill

    At one time we had 4 mills here, now they are all gone and we have to travel around50 miles for an actual feed mill on one of the most dangerous roads US35 in West Virginia (lots of deer accidents). I was an Auctioneer on the last one to go out here in Pomeroy, Ohio when they sold out over 25...
  14. K

    Spraying weeds with boom sprayer.

    I don't know what Scotch Broom is, but if it's like the broom grass we have here, you need to take some soil samples to your county agent and see how much lime you need to put on per acre and that will probably take care of it and make the whole 10 acres produce a lot better. You will probably...
  15. K

    john deere 2040 injection pump removal.

    I've always sent or taken my injector pumps to Dieseltech. He's darned good and has a quick turn around on them. There are others on here but I have met him and been in his shop. He's my go to person for injector pump repair
See more
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top